How to Fix Sleep Wakeup, Shutdown, USB3 and Graphic Card Problem on Hackintosh macOs Sierra
In this tutorial I will show you how you can fix the Sleep Wakeup, Shutdown, USB3 and Graphic Card Problem On Hackintosh macOs Sierra. This Sleep Wakeup Problem on Hackintosh macOs Sierra fix has been tested on GIGABYTE GA-Z170X-UD5 TH and i7-6700k Skylake CPU.
Steps To Fix Sleep Wakeup Problem on Hackintosh macOs Sierra
1. Open the Clover Configurator and Mount EFI Partition. (If you need to install Clover Configurator, you can download it from here.)
2. Open the config.plist file(Double Click on it – by default will open with clover configurator). The config.plist file will be located in EFI > CLOVER > config.plist
3. Go to Boot and select darkwake=0.
4. Remember To Save Clover Configurator and Reboot.
Steps To Fix Shutdown Problem on Hackintosh macOs Sierra
1. Open the Clover Configurator and Mount EFI Partition. (If you need to install Clover Configurator, you can download it from here.)
2. Open the config.plist file(Double Click on it – by default will open with clover configurator). The config.plist file will be located in EFI > CLOVER > config.plist
3. Go to Acpi and Check-off FixShutdown.
4. Remember To Save Clover Configurator and Reboot.
Steps To Fix Nvidia Graphic Card Problem on Hackintosh macOs Sierra
1. Open the Clover Configurator and Mount EFI Partition.
2. Using you favorite Editor open the config.plist file. The config.plist file will be located in EFI > CLOVER > config.plist
3. Once the file is open in the Editor, scroll-down to the bottom and change this tag to true.
4. Remember To Save the file and Reboot.
Steps To Fix USB3 Problem on Hackintosh macOs Sierra
When you must have installed hackintosh macOS Sierra, you must have not checked-off Increase Max Port Limit.
1. So, now open multibeast and check-off Increase Max Port Limit.
2. Open the Clover Configurator and Mount EFI Partition.
3. Using you favorite Editor open the config.plist file. The config.plist file will be located in EFI > CLOVER > config.plist
4. Once the file is open in the Editor, scroll-down and search for tag <key>KextsToPatch</key> and paste the following code before the closing </array> tag.
5. Remember To Save the file and Reboot.
